Redeem discount

VAT:

Electrifying procedures in Fibre Blowing Vans

Cut costs and CO2-emission.

Electrifying procedures saves 2,5 hours of idling a day

By using the LPS solution instead of a conventional lead system there is no need for idling - subsequently fuel consumption and CO2 emission are reduced considerably.

The LPS including Super Charge - charges 12 times faster than lead systems and does so simply during driving. Therefore, the van is fully operational when arriving and doesn’t need idling.

LPS1200W-Kit2.png

Eltel Networks gain a reduction of 990 litres fuel in total per year/van and 3.4 tonnes CO2.

Replacing a traditional lead battery system
and fuel-based generator/compressor with modern LPS power supplies,
optimizes business and gives a smoother work flow too.

CP POWER SYSTEMS USED BY

  • 3.png
  • 4.png
  • 1.png
  • 2.png
  • mercedes-logo.png
  • carglass.png
  • aarsleff.png
  • bmw.png
  • BAE-systems.png
  • BT.png
  • eltel.png
  • 3.png
  • 4.png
  • 1.png
  • 2.png
  • mercedes-logo.png
  • carglass.png
  • aarsleff.png
  • bmw.png
  • BAE-systems.png
  • BT.png
  • eltel.png

Compact and All-in-One

Space saving and long lifetime without maintenance

Save 120 kg in payload

The LPS including Super Charge weighs 29 kg. A similar traditional battery system with 4 AGM lead batteries weighs more than 150 kg.

Double amount of energy and fast charging
Lithium batteries have a very high energy efficiency, and combined with fast charging, an LPS can easily replace a huge traditional battery system.

Close
lps-2500w-li-ion100ah-V2.png

#1 LPS 2500W for basic equipment: Replaces traditional battery system and idling

LPS #1 powers all necessary appliances in the fibre van. The LPS supplies both 12V and 230V (pure sine wave) equipment.

The LPS 2500W is used without any engine idling and charges only while the van is driving.

Appliances:
Monitors and IT equipment
Cable feeder
Battery charger
Heating system
Warning light
Work light
Cabin light

#2 LPS 2500W + e-compressor: Replaces fuel based compressor, fuel handling and jerry

LPS #2 powers the electric compressor which provides the continuous air flow securing perfect fibre blowing results.

LPS_2500w-Kaeser-iComp.png

No fuel onboard and no heavy lifting 
An electric compressor can be left in the vehicle as there is no exhaust. This avoids heavy lifting and creates a better working environment

Kaeser-iComp3-b.png
super-charge-icon.png

LPS Super Charge makes fast charging even faster!

Super Charge doubles the power into LPS from the alternator. It charges 12x faster compared to a traditional lead battery system.

+ Operational after only 5 minutes of driving
+ Fully charged in 1 hour with LPS Super Charge

DC-DC-SuperCharge-white.png

Charging 12x faster than a traditional battery system 
 
Super Charge doubles charging power from the van to 90 A (Approx 1000W). Even short drives make you fully operative and engine idling unnecessary.

The LPS charges up to 6x faster as standard - compared to a traditional lead battery system. 

Adding the LPS with LPS Super Charge, gives 12x faster charging times than a traditional lead battery system. Even short drives become extremely efficient and a full charge can be made in only 1 hour from the van.

Power solutions for Fibre Vans

Product image

LPS 2500W - 100Ah

Powers 2500W and 5000W in peak.

€ 2,649.00
Product image

LPS 2500W - KIT1

Powers 2500W and 5000W in peak.
Including Remote and Console.

€ 2,806.00
Product image

LPS 2500W - KIT2

Powers 2500W and 5000W in peak.
Including Remote, Console and Super Charge.

€ 3,185.00

Let's find the right power solution for you

Contact Clayton Power
P: + 45 46985760
or one of our local sellers.

Newsletter