Power solution for work vans

230 V power in a van – reliable power for tools and equipment, wherever you work.

230 V power on board turns your van into more than just transport. With the right power system, you can run electric tools, charge batteries and use several pieces of equipment at once – inside and outside the vehicle. Even with the engine off.

Explore the system configurator.


The Virgin Media O2 case study film

Silent, engine-off operation – no idling, less fuel and fewer emissions.

Clean, stable sine-wave power for sensitive test equipment.

230 V AC and 12 V DC power at the same time.

Including built-in Jumpstart function for flat starter batteries.

“It can all be done with the engine off.”

Ben Hughes, Regional Operations Manager

The challenge. The work van is a mobile workplace, and it needs power for tools.

LPS II 230V & 12V power supply with li-ion battery

How do you get 230 V power in a van?

For many tradespeople and service technicians, the work van is a mobile workplace. But despite carrying professional tools and equipment, one essential thing is often missing: reliable access to 230 V power.

That can mean relying on an external mains connection, a portable generator or leaving the van engine idling to get the job done.

Fortunately, there are smarter ways to bring 230 V power into a van

There are several ways to get 230 V in the work van:

Conventional vans typically run on a 12 V electrical system, while many power tools, battery chargers and electrical appliances require 230 V AC.
To supply 230 V from a 12 V battery, you need an inverter. This converts direct current (DC) from the battery into alternating current (AC), similar to the power supplied by a standard mains socket.

12 V to 230 V inverter: A relatively simple solution powered by the vehicle battery. The battery capacity, the installation and the inverter output determine which tools and appliances can be used.

Separate battery system with inverter and charger: Provides an independent source of 230 V power without running the engine, but requires several components and a more complex installation.

All-in-one lithium power supply: Combines the battery, inverter and charger in one compact unit, delivering both 230 V AC and 12 V DC.

The LPS II series

One system.
A better way to work.

idling

Eliminate idling

Reliable power for mobile work — without running the vehicle engine or a generator on site.

Compact

Lightweight design

The LPS II delivers high power at a far lower system weight — helping protect payload in professional vans.

EV

Designed for electric vehicles

Charge your LPS power supply from the vehicle.

Onboard power solution in EVs

Rapid charging

Supercharger

Get the most out of LPS recharging from the vehicle alternator on short drives between jobs with the optional Supercharger.

Safety

Safety you can trust

Certified mobile power with household-level electrical safety — for 12 V DC and 230 V AC use inside or outside the vehicle.

Fuel

No fuel handling

Fuel consumption and daily refuelling are eliminated — with savings measured against the previous setup.

No fuel handling

Power Platform

Live monitoring

Track system status, energy use and maintenance indicators across the fleet through the Power Platform.

Charging

Flexible charging

Charge from the vehicle, from solar or from the mains — adapting to whichever energy sources are available throughout the year.

Scalable

Increase capacity

Add G4 Lithium batteries to increase system capacity, flexibility and runtime for demanding mobile power applications.

Peak Inrush Power

13 000 W Peak Inrush Power

With up to 13,000 W Peak Inrush Power, the LPS II 3000 delivers the extra capacity needed for demanding tools, equipment, and mobile work.

Ready

Tools ready when needed

Onboard power keeps tool batteries charged and ready whenever crews need them.

Onboard power solution for EVs and Diesel Vans

Jumpstart

Jumpstart – never get stranded again.

Start the vehicle from the Clayton Power system when the starter battery is flat — without bulky booster packs or roadside assistance.

App

App connected

Download the Clayton Power GO app to your phone and unlock extra features. Switch the power on and off, check charging status and much more.

Easy access and overview with app

installation

Easy installation

A compact all-in-one system built for quick workshop installation and easy transfer between vehicles.

Maintenance

No maintenance

Long-lasting, maintenance-free power — without the servicing demands of generators or traditional lead-acid systems.

How much power do you need in your work van?

Charging a laptop is very different from running an air compressor, an angle grinder or other demanding power tools. When choosing a power supply, there are three important factors to consider:

Power (W) indicates how much power a tool or appliance requires during operation.

Battery capacity (Wh or kWh) indicates how much energy the battery can store, and therefore how long your equipment can operate between charges.

Starting current is the short, higher current demand that some equipment, particularly motor-driven tools, requires when starting.

A 2,000 W inverter is not necessarily sufficient for a tool that normally draws less than 2,000 W. If the tool has a high starting current, the inverter may still become overloaded.


You also need to consider the combined load. When several tools or appliances are used at the same time, the power supply must be able to handle their total demand.


This is particularly important in professional work vans, where battery chargers, work lights and power tools often need to run at the same time.

Calculate your power requirements instead of guessing.

Choosing the right battery capacity and inverter output is not always straightforward.


With the Clayton Power online system configurator, you can select the tools and electrical equipment you use during your working day and specify how long each item needs to run.


This gives you a clearer picture of your power and energy requirements and helps you identify a suitable system for your work.

230 V power in electric vans – is the built-in socket enough?

An increasing number of electric vans come with built-in 230 V sockets. That is convenient, but a mains socket in an EV does not necessarily mean it can support the demands of professional tools and equipment throughout the working day.

Reliable 12 V DC supply at the same time.

Depending on the vehicle and its specifications, there may be limits on the available power, the number of appliances that can run at the same time and whether the socket can be used when the vehicle is parked.


Tools with high starting currents can present additional challenges, even when their normal power consumption is within the socket’s rated output.


Professional work vans also need more than 230 V. Work lights, warning beacons and other auxiliary equipment often require a reliable 12 V DC supply.


So the real question is not simply whether your electric van has a 230 V socket.



It is whether the complete power system can run the equipment you need, safely and reliably – at the same time.

A complete 230 V and 12 V power supply in one unit.

At Clayton Power, we developed the Lithium Power Supply (LPS II) for professional work vans where reliable mobile power is an essential part of the working day.


LPS II combines a lithium battery, pure sine wave inverter and charger in one compact unit. It delivers both 230 V AC and 12 V DC, without the complexity of installing several separate components.


The system can power several tools and appliances at the same time, provided their combined demand stays within the system’s capacity.


LPS II can be recharged while driving or from other energy sources, depending on the model. Selected models also support solar charging without requiring a separate solar charge controller.


That makes it a flexible solution for both conventional work vans and EVs that need a reliable, independent power supply.

Run several tools without idling or a generator.

For many mobile operations, being able to work independently of the vehicle engine makes a significant difference.


A battery-based power supply lets you run 230 V tools and equipment without a fuel-powered generator or a diesel van left idling. That means less noise on site, no local exhaust emissions from generating power and greater flexibility when working in locations without access to mains electricity.


That is particularly valuable for service engineers, utility companies, contractors and maintenance teams working across multiple locations.


Whether the van is parked at a construction site, beside an installation or outside a customer’s premises, work can continue as long as the power system has sufficient capacity. And when several tools and appliances can run at the same time, there is no need to constantly choose between battery chargers, work lights and power tools

A complete 230 V and 12 V power supply in one unit.

At Clayton Power, we developed the Lithium Power Supply (LPS II) for professional work vans where reliable mobile power is an essential part of the working day.


Pure sine wave inverter and charger in one compact unit

LPS II combines a lithium battery, pure sine wave inverter and charger in one compact unit. It delivers both 230 V AC and 12 V DC, without the complexity of installing several separate components.


The system can power several tools and appliances at the same time, provided their combined demand stays within the system’s capacity.


LPS II can be recharged while driving or from other energy sources, depending on the model. Selected models also support solar charging without requiring a separate solar charge controller.


That makes it a flexible solution for both conventional work vans and EVs that need a reliable, independent power supply.

Example: LPS II 3000 – 2 kWh

For work vans with higher power requirements, the LPS II 3000 offers:


+ 230 V AC pure sine wave output with 2,300 W continuous power

+ Up to 3,000 W for 10 minutes

+ Up to 13,000 W Peak Inrush Power for demanding equipment start-up

+ 12 V DC output for electrical equipment and auxiliary systems

+ Integrated LiFePO4 battery with 2,112 Wh nominal capacity

+ Charging from the vehicle, mains electricity or solar panels



The LPS II 3000 is designed for professionals who need powerful, reliable electricity for their tools and equipment without depending on an external mains connection.


Choosing the right 230 V power supply for your van

The best solution is not necessarily the biggest inverter or the largest battery.


It is the power system that matches the work your van has to do.


Which tools do you use? Will several appliances run at the same time? How long do you need to work between charges? And do you also need 12 V power for auxiliary equipment?


Knowing these requirements makes it easier to choose the right combination of inverter output and battery capacity.


With Clayton Power’s online system configurator, you can start with your own tools and equipment and find a solution that matches your working day.


230 V power in your van should not limit what you can do. It should give you the freedom to work wherever you are needed.

Ready to make your work vehicle more capable?

Tell us what equipment you need to power and how your vehicle is used. We will help you find a solution that fits your daily operations.


Give Clayton Power a ring: +44 (0) 292 168 4379
or see how to improve fleet performance