Utility and infrastructure service
Test equipment, work lights, tools and chargers.
E-GEN Series 6-24 kWh
E-GEN
AvailableE-GEN Series 6-24 kWh
E-GEN gives professional fleets reliable 400 V, 230 V and 12 V power — with quieter battery-powered operation, flexible charging and connected fleet visibility in one system.
- 400 V Three-phase, 230 V single-phase and 12 V from one system.
- Up to 18,000 W peak output
- Connected to Clayton Power Platform
- Recharge from mains, vehicle alternator and solar
- Model no.
- E-GEN 6 kWh - V3: CE2411 | E-GEN 12 kWh V3: CE2412 | E-GEN 18 kWh - V3: CE2413 | E-GEN 24 kWh - V3: CE2414
What your team gains
One system.
Reliable energy across the fleet.
Clayton Power gives every vehicle in the fleet a reliable, monitored energy system — configured for daily demand, built to reduce fuel dependence, and managed through the Power Platform.
Generators powered the past.
E-GEN powers what comes next.
Generators have kept field operations running for years. But today’s fleets need more than temporary power.
They need quieter worksites, fewer local emissions during use, less fuel handling, lower maintenance demands and better visibility across every vehicle.
E-GEN is built for that next step — helping professional fleets reduce generator dependency and move more of their mobile power supply to a connected, battery-powered solution.
E-GEN is designed for professional operations where mobile power is critical to the task.
District heating, gas and pipe networks
Welding, PE welding, foaming, pumps and pipework equipment.
Civil construction and contractors
Temporary power, pumps, tools and charging.
Telecom and fibre networks
Fibre blowing, splicing, testing and specialist tools.
Mobile workshop and specialist service
230 V and 12 V power, diagnostics, refrigeration and vehicle-integrated systems.
Power Platform
Know what powers your fleet
— and what it saves.
E-GEN delivers the power. Power Platform gives you the overview.
When every vehicle has its own mobile power system, fleet owners need to know what is happening across the fleet. Our Power Platform connects every E-GEN system, so you can track energy use, charging status, alerts and documented impact from one shared overview.
Built for fleets that work in the field every day.
Power Platform is what makes E-GEN more than a battery system in a vehicle. It gives fleet owners the visibility, documentation and control needed to scale mobile power across many vehicles.
A better power setup for the working day.
Give your team reliable power from the vehicle — without adding generator routines, idling or unnecessary charging stops.
Specifications
General
- Model no.
- CE2411
- Cooling
- Forced air
- Ambient temperature range (discharge)
- -20 – 50 °C (load dependent)
- Ambient temperature range (charge)
- 0 – 50 °C
- IP classification
- 20
- Protection class
- I
- Maximum altitude
- 2000 m
- Product weight
- 145 kg
- Product size (H × W × L)
- 675 × 680 × 480 mm
Battery
- Type
- Rechargeable Li-ion battery system
- Chemistry
- LiFePO4
- Capacity
- 560 Ah
- Available capacity
- 470 Ah
- Cycles
- 3500
- Operating mode consumption
- < 90 mA
- Sleep mode consumption
- < 50 mA
- Marking (IEC 61960)
- 4IFpP73/175/208-2
- Marking (IEC 62620)
- lFpP/73/175/208/[2P4S]M/-30+60/90
AC Input
- Voltage
- 207 – 253 V
- Frequency
- 45 – 65 Hz
- Charge power (maximum)
- 1725 W
- Power with load (maximum)
- 3000 W
- Connector type
- NAC3 FCA
AC Output (System)
- Total power – continuous @ 40 °C
- 4100 W
- Total power – continuous @ 50 °C
- 3000 W
- Total power – 10 minutes
- 4500 W
- Frequency
- 50 Hz
- Efficiency
- 94 %
- Power factor
- 0.77
- Idle consumption
- 80 W
- Fault current (rms)
- 30 mA
AC Output (3 phase)
- Voltage (± 10 %)
- 400 V pure sine wave
- Total power – continuous @ 25 °C
- 4500 W
- Total power – peak 10 s
- 12000 W
- Connector type
- CEE 16A 3P+N+E
AC Output (1 phase)
- Voltage (± 10 %)
- 230 V pure sine wave
- Total power – continuous @ 25 °C
- 3000 W
- Total power – peak 10 s
- 6000 W
- Connector type
- NAC3 FECB
DC Input
- Voltage
- 11.5 – 32 V
- Current
- 100 A
- Connector type
- Terminal – M8
DC Output
- Voltage
- 10 – 14.4 V
- Discharge current – continuous
- 180 A
- Discharge current – 1 min.
- 270 A
- Idle consumption
- < 5 W
- Charging current – continuous
- 180 A
- Connector type
- Terminal – M8
Solar (Input)
- Voltage
- 15 – 50 V
- Charging power (max.)
- 1200 W (3 × 400 W)
- Charging current (max.)
- 45 A (3 × 15 A)
- Short circuit current (Isc)
- 30 A
- Connector type
- Terminal – M4
I/O
- Input port
- C1
- Input (voltage)
- 0 – 50 V
- Input (current)
- < 50 mA
- Output ports
- 3 × M12
- Output (voltage)
- 10 – 14.4 V
- Output (current)
- 1.5 A total (overcurrent protected)
- Connector type (M12)
- Type A – 5-way
- Connector type (C1)
- Terminal – M4
Operating notes
- Below -20 °C
- The unit locks and must be returned to Clayton Power for resetting, at the customer’s expense.
- Charging below 0 °C
- The E-GEN will not charge correctly and charging can damage the battery cells.