Product
160 W sFlex Solar Panel
Monocrystalline solar panel with 160W nominal power, designed for mobile and off-grid power systems.
View productLPS II 3000 - 2 kWh
Lithium Power Supply
AvailableLPS II 3000 - 2 kWh
All-in-one Lithium Power Supply providing 230 VAC and 12 VDC power to appliances without additional equipment complexities. Even when the vehicle is switched off, the LPS II will still recharge and power your tools.
- Ultra compact design with high power density
- LiFePO4 battery cells for reliability
- Peak 13,000 W AC output power
- 350 A 12V output (60 seconds)
- 2112 Wh (2 kWh) battery capacity
- Charging from alternator, solar, and mains
- Jumpstart capability
- Status overview and charging summary
- Clayton Power GO App support
- Additional battery expansion option
Suggested retail price
From € 3,695 excl. VAT
- SKU
- CL2003, CL2103
- Model no.
- LPS2 3012-160
The LPS II series
One system.
A better way to work.
Specifications
Battery
- Type
- Li-Ion 12V – 160Ah
- Chemistry
- LiFePO4
- Capacity
- 160Ah (2112Wh)
- Available Capacity
- 134Ah (1900Wh)
- Cycles
- 2000 cycles (approx. 10 years)
AC Output
- Output Voltage
- 230 VAC pure sine wave ±10%
- Output Frequency
- 50 Hz
- Continuous Power
- 2300 W
- 10 Min Power
- 3000 W
- Peak Power
- 13000 W
- Efficiency @ 1000W
- 94%
AC Input
- Input Voltage
- 207 VAC – 253 VAC
- Input Frequency
- 45 Hz – 65 Hz
- Charge Power
- 790 W
DC Output
- Output Voltage
- 10-14.4 VDC
- Continuous Discharge Current
- 180 A
- 1 Min Discharge Current
- 350 A
DC Input
- Input Voltage
- 11.5 - 32 VDC
- Input Current
- 45 A
- With External Converter
- 90 A
Solar Charging
- Max Charging Power
- 400 W
- Input Voltage Range
- 15 – 50 VDC
- Max Charging Current
- 15 A
Physical
- Weight
- 27.5 kg
- Dimensions (H×W×L)
- 256×277×409 mm
- IP Rating
- IP21
- Operating Temperature
- -20°C ~ 50°C
Additional
- Self-discharge per month
- < 5%
- Self-consumption (DC only)
- < 1 W
- Jumpstart
- 40 A / 5 min
- Cooling
- Forced air (fan)
Certifications & compliance
LPS CE Declaration
This shows that the LPS II complies with the EU regulations as required by CE.
R027-06 - UKCA Declaration LPS
This shows compliance with the UKCA marking. It is almost the same as the CE declaration but addition to complying with the EN/IEC standards as listed in the CE declaration, it also lists conformity to the following UK Statutory Instruments: 2016 No 1101 2016 No 1091 2012 No 3032
EN IEC 62368-1:2024+A11:2024
This is a test report showing compliance to EN IEC 62368-1:2024+A11:2024, and is the basis for the CE compliance.
LPS II - E5 10R06 01 0488 01
The “E” marking certificate showing compliance with UN regulation no. 10. This certification is required for equipment installed in vehicles.
LPS II - UN 38.3 160ah
This is the UN38.3 test report for the LPSII units using the 160Ah batteries. It is needed for transport of dangerous goods to make it possible for us to send the LPSII to customers.
LPS II - UN 38.3 100ah
Same as LPS II - UN 38.3 160ah but for the units using the 100Ah batteries.
LPS II - Material Safety Data Sheet, 1500W, 2500W
This is a standardized document that contains crucial occupational safety and health information related to the content of various substances and chemicals used in the LPS II. This document if for the small units.
LPS II - Material Safety Data Sheet 3000W
This is a standardized document that contains crucial occupational safety and health information related to the content of various substances and chemicals used in the LPS II. This document if for the LPS II 3000
Installations in the Netherlands – NEN1010 Compliance
NEN1010 is a standard that outlines requirements and guidelines for the safe and compliant execution of low-voltage electrical installations. In certain cases, installations may be assessed and approved by local inspection bodies to ensure conformity with the standard.
More from this family
