Do you want to switch to

Item was added to your basket

LPS II 2500 - 1 kWh

All-in-one Lithium Power Supply

The powerful and compact LPS provides power to your 230 VAC and 12 VDC appliances without the complexities of additional equipment.
Configure your LPS solution
1 kWh LPS with Super Charger
charging
48 minutes
from 0-80%
Image Caption

LPS II 2500 - 1 kWh

Model Number: LPS2 2512-100

SKU: CL2002, CL2102

Charging:

Charging from alternator
Charging from sun
Charging from mains

Features:

Jumpstart
Status overview
Charging summary
Additional battery option

240V Strength:

Battery Capacity:

£ 2,549.00 excl. VAT
£ 3,058.80 Incl. 20% VAT
Configure kit

Flexible charging ensures top efficiency

Rapidly recharged for every stop and every job.

Charging from an alternator

The built-in booster allows regeneration with 500 W from any alternator.
500 W standard.
1000 W Super Charger (extra).

Charging from solar panels

Connect solar panels directly. The built-in solar charge controller also allows regeneration from the sun with 400 W.

Charging from mains

Connect to mains, the built-in intelligent charger regenerates with 750 W.
Image description

Switch for 12V DC Output

12V DC can be turned ON/OFF from the front of the LPS. If pressing OK the LPS will enter the main menu. From the main menu it is possible to find data for DC charging and 12V DC output.

Image description

Switch for 230 VAC output

230 VAC can be turned ON/OFF from the front of the LPS. If pressing OK the LPS will enter the main menu. From the main menu it is possible to find data for AC charging and 230 VAC output.

Image description

RCBO relay

The RCBO relay is included in the LPS. In case of overload, it will shut down for the 230V AC output.  The RCBO relay is also a fault current circuit breaker.

Image description

230V output Schuko plug

In front of the LPS it is possible to e.g., connect 230V equipment or an extension cord.  

Image description

12V DC output

12V DC appliances can be connected to the output terminals.

Image description

12V or 24V DC input

The LPS is charged from any alternator via the 12 or 24V DC input. The DC IN shall be connected to the starter battery. The built-in booster will raise the voltage and at the same time also protect the starter battery.

For charging from solar panels, they shall also be connected to DC -IN or for DC OUT (and C2).

Image description

Remote and data

There is an M12 connection for the remote control. The remote control can be used for turning on/off the LPS.  

The M12 data connection is for upload of software updates, change of parameters or withdrawal of data from the LPS via a can modem. 

Image description

C1 and C2 connection

C1: For charging from the vehicle, it is required to connect C1 to D+ or the ignition key.

C2: For charging from solar panels, it is required to connect to C2. Solar panels shall also be connected to DC -IN or for DC OUT

Image description

230V IN and OUT

The grey Neutrik connector is included for 230V AC output.

The blue Neutrik connector is for 230V AC input. The charging cable with the blue Neutrik is shipped together with LPS II.

Image description

Metal cage for noise reduction and safety

Vibration and safety tested for leisure, industrial and automotive use.

RoHS Directive 2011/65/EU, Low Voltage Directive 2014/35/EU, EMC 2014/30/EU, E-Marking

Image description

Efficient high-voltage AC unit

Redesign of all functionalities for making the LPS unit as ultra compact as possible. The high-voltage AC inverter has an impressive 94% efficiency at 1000 W and high peak performance for start-up of heavy-duty loads.

Image description

Redesigned boards and made for harsh environments

All boards within Clayton Power's LPS are coated to ensure maximum functionality even in challenging environments. The inverter, charger, solar regulator, and DC booster have been redesigned to make the product as compact and efficient as possible.

Image description

High energy density Li-Ion Battery Cells

High-end and compact LiFePO4 battery cells with high energy density and long lifetime.

All-in-one Lithium Power Supply

The powerful and compact LPS provides power to your 230 VAC and 12 VDC appliances without the complexities of additional equipment.
Configure your LPS solution

Power wherever you need it

Modern power solutions made for specialists
Service vehicle
Refrigerated vehicle
Campervan
Cottage
Yacht and sailboat
statistics

Smart functions, easy overview and adjustability

The LPS can be used in many setups and scenaries after your specific needs.
+ Adjustable 230 VAC charging
+ Adjustable 12 - 30 VDC charging
+ Adjustable Solar charging
+ Summary of charging history
+ Status overview
+ Jumpstart

All-in-one and everything included

An LPS II 2500 has a built-in: 1 kWh Lithium-Ion Battery, 230 V Sine Wave Inverter, Booster (Charging from alternator), 400W MPPT Charge Controller (charging from solar panels), Intelligent charger (charging from mains), relays etc.

LPS II 2500 - Weight: 24 kg

Traditional battery system - Weight: 90 kg

FAQs

What does 1 and 2 kWh mean?
The lithium battery capacity of 1 kWh means that you can run an application with a consumption of 1000 W in one hour, 500 W for two hours and 250 W for four hours. A 2 kWh battery has twice the capacity.
Example: Power tools 500 W x 1 hour + Light 150 W x 5 hours = 1,25 kWh
How many cycles can it achieve?
The battery can handle 2000 cycles – which is usually equivalent to 10 years of use.
How long does it take to recharge?
1 kWh lithium:
• From 0-80% in about 60 mins from DC and mains
2x faster recharging time with the supercharger – from 0-80% in half an hour (only from alternator)
• 400W recharges from solar, from 0-80%, in 90 mins (which is why solar is often used to reduce fuel consumption and for off-grid)
• You can use mains, supercharger and solar in combination to recharge even faster

2 kWh lithium:
• From 0-80% in about 120 mins from DC and mains
• 2x faster charging time with the supercharger – from 0-80% in one hour (only from alternator)
• 400W recharges from solar, from 0-80%, in 240 mins
• Again, you can use all three sources simultaneously for faster recharge

Is it possible to add extra batteries?
Right now, this isn't possible.
Is it possible to change the battery inside?
No, the LPS is extremely compact and that is one of reasons that it is not possible to change the built-in lithium battery, but it has a very long lifetime.
How many units are currently in use?
There are more than 35,000 Clayton Power products in use across the UK and Europe.

Specifications

SKU No.  CL2002
Battery type  Li-Ion 12V – 100Ah 
Battery chemistry  LiFePO4 
Battery capacity  100Ah (1320Wh) 
Battery available capacity  80Ah (1050Wh) 
AC Input voltage  207 VAC – 253 VAC 
AC input frequency  45 Hz – 65 Hz 
AC Input power (Charge power)  720 W 
AC Output voltage +- 10%  230 VAC pure sine wave 
AC Output frequency  50 Hz 
AC output power – Continuously (ambient temp)  2300 W
AC output power - 10 min.  2500 W 
AC output power - Peak 4000 W 
AC output power - AC In connected  3000 W 
AC output efficiency (1000W)  94% 
DC Input voltage  11,5 - 32 VDC 
DC input current  45 A 
DC input current with 1 external converter (efficiency)  90 A 
DC output voltage  10-14,4 VDC 
DC output charge current – Continuously 90A
DC output discharge current – Continuously   180A 
DC output discharge current – 1 min.  270A 
Solar input charging power (max.)  400W 
Solar input voltage   15 – 50 VDC 
Solar input charging current (max.)  15 A 
Input signals (5)  C1, C2, M12 x 3 
Output signals (4)  C2 & M12 x 3 
Self-discharge rate per month  < 5% 
Self consumption - Operating mode, Only DC Output active  < 1 W 
Self consumption - Operating mode, inverter and DC Output in with > 50W  30 W 
Connection 230VAC  Neutrik and Schuko 
Connection C1 / C2   M4  
Connection DC input  M8  
Connection DC output  M8  
Cooling  Forced air (fan) 
Operating temperature (output will be limited below 0°C and ab)  -20°C~50°C 
IP rating  IP21 
Product weight  23,5 kg 
Product dimensions (HxWxL)  256x277x409mm 
Jumpstart  40 A / 5 min