Clayton Power LPS II – Fully compliant with IEC60364
Safety and reliability in accordance with the European electrical installation standard IEC60364.
Electrical installations in mobile and stationary applications must meet strict safety requirements. The European standard IEC60364 defines the general principles for designing and installing low-voltage electrical systems to ensure safety, reliability, and protection against electrical hazards.
With the Clayton Power LPS II, you get a mobile power solution that fully complies with IEC60364 and guarantees safe operation across a wide range of professional applications.
What is IEC60364?
IEC60364 is the cross-European standard for low-voltage electrical installations, published by the International Electrotechnical Commission (IEC). It specifies how electrical systems should be designed, installed, and maintained to ensure safety from electric shock, fire, and other risks.
Compliance with IEC60364 ensures that systems are properly grounded, protected, and dimensioned according to recognized European best practices.
How does the LPS II meet the IEC60364 standard?
The Clayton Power LPS II system is designed with integrated safety features that make it fully compliant with IEC60364 requirements:
• Built-in ground fault and short circuit protection
• Proper isolation between AC and DC circuits
• Integrated RCD (residual current device) and circuit breakers
• Optimized cable dimensioning and internal fusing according to standard requirements
• Clear and safe connection points for installation in vehicles or stationary setups
• Proper isolation between AC and DC circuits
• Integrated RCD (residual current device) and circuit breakers
• Optimized cable dimensioning and internal fusing according to standard requirements
• Clear and safe connection points for installation in vehicles or stationary setups
FAQs
No special certification is required to use LPS II, but installations should of course always be performed by a qualified professional familiar with IEC60364 principles.
Yes. IEC60364 includes requirements for low-voltage installations in mobile and transportable units, making it directly relevant for service vehicles, mobile workstations, and off-grid applications.
The HD 60364 is a derivative of the IEC 60364, published in the European Union by the European Committee for Electrotechnical Standardisation (CENELEC). The HD 60364 is based on IEC 60364 and basically shares the same structure, but it additionally also contains specific requirements for the CENELEC member countries.
Documentation regarding IEC60364 compliance
The Clayton Power LPS II complies fully with the IEC60364. For further documentation, we refer to the following documents:
Regulations:
UNE HD 60364-7-717:2013/AC:2014
Here’s what our customers say about the LPS II
The Lithium Power Supply II series from Clayton Power is designed for professionals on the move:
Powering the Future: National Grid Transitions to Cleaner Vehicle Technology
Net-zero: The transition to electrification was a no brainer
Compact power supply with zero idling in the vehicles of Aarsleff Rail
The daily work requires power for different equipment
Get rid of the generator
The gardener goes cordless electric
All-in-one power solution optimises hydraulic services in the field
230V in the vehicle is a huge advantage
All the power you need for a day’s work
Forest contractor Per Kjær APS
Lundgaard Carpenter and Assembly
Kloak Ekspressen
Safety you can trust: Meet the Clayton Power Lithium Power Supply II (LPS II)
Powering performance. Lowering your emissions.
The LPS II is a complete, plug-and-play mobile power system designed for both 12V and 230 V installations. It provides silent and emission-free power wherever you need it — without the need for a generator or engine idling.
Whether you are an installer, a service worker or a technician, the LPS II delivers safe, clean, and compliant mobile energy.
Learn more about the LPS II in commercial vehicles here:
LPS II power supply for commercial vehicles
Learn more about the LPS II series
The LPS II Series
Extra feature:
Optional supercharger for ultra-fast charging from the vehicle's alternator
– charges up to twice as fast.
Configure your LPS solution
– charges up to twice as fast.
Extra feature:
The LPS power supply can recharge with up to 400 W per hour from solar panels, ensuring fast and efficient energy recovery.
Configure your LPS solution
LPS II 1500 - 1 kWh SE
Peak: 2600 W - Power: 1500 W.
€ 1,900.00 excl. VAT
€ 2,375.00 Incl. 25% VAT
LPS II 2500 - 1 kWh
Peak: 4000 W - Power: 2500 W.
€ 2,995.00 excl. VAT
€ 3,743.75 Incl. 25% VAT
LPS II 3000 - 2 kWh
Peak: 5000 W - Power: 3000 W.
€ 3,695.00 excl. VAT
€ 4,618.75 Incl. 25% VAT
LPS II 3000 - Kit 1
LPS II 3000 - 2 kWh includes mounting bracket and remote control. Peak: 5000 W - Power: 3000 W.
€ 3,992.00 excl. VAT
€ 4,990.00 Incl. 25% VAT
LPS II 3000 - Kit 2
LPS II 3000 - 2 kWh includes solar panels, mounting bracket and remote control. Peak: 5000 W - Power: 3000 W.
€ 4,390.00 excl. VAT
€ 5,487.50 Incl. 25% VAT
Let's find the right power solution for you
Contact Clayton Power
P: +45 46985760
or one of our Sellers.